Drum Holders
Expanding rubber spiral brand abrasive holders great for hard-to-reach areas.
Typically used for finishing, removal of weld seams, burrs and other imperfections from a range of surfaces such as metal and wood.
These drum holders are to be use with the specified abrasives (not sold by Flexipads). The slotted rubber design promotes air flow through the drum and enhances temperature resistance whilst simultaneously helping to fixate the abrasive in place.
With hard coated 6 or 8mm metal spindles, these are suitable for both pneumatic and portable power tool machines.
| Size | Shank | Min RPM | Max RPM | Reference |
|---|---|---|---|---|
| 10 x 10mm | 6mm | 33,250 | 47,500 | 60010 |
| 10 x 20mm | 6mm | 33,250 | 47,500 | 60015 |
| 12 x 25mm | 6mm | 32,250 | 47,500 | 60019 |
| 13 x 25mm | 6mm | 25,500 | 36,500 | 60025 |
| 15 x 10mm | 6mm | 22,000 | 31,500 | 60030 |
| 15 x 30mm | 6mm | 22,000 | 31,500 | 60035 |
| 19 x 25mm | 6mm | 17,500 | 25,000 | 60040 |
| 22 x 20mm | 6mm | 14,700 | 21,000 | 60045 |
| 25 x 25mm | 6mm | 13,000 | 19,000 | 60050 |
| 30 x 20mm | 6mm | 11,000 | 15,800 | 60055 |
| 30 x 30mm | 6mm | 11,000 | 15,800 | 60060 |
| 38 x 25mm | 6mm | 8,700 | 12,500 | 60065 |
| 45 x 30mm | 6mm | 9,000 | 10,500 | 60070 |
| 51 x 25mm | 6mm | 7,400 | 9,300 | 60075 |
| 60 x 30mm | 6mm | 6,500 | 7,900 | 60080 |
| 75 x 30mm | 8mm | 4,500 | 6,300 | 60085 |
Note our Drum holder max RPM’s are set to 25m/s as this is the maximum speed we recommend for good results. The holders can be run up to 30m/s with suitable abrasives.
