http://www.health-canada-pharmacy.com | http://nygoodhealth.com

LP100

HIGH CUT Liquid Shine™Open in new tab

  • Quantity:  500ml

  • Easily removes P1500 marks
  • Free of silicone, wax or glaze
  • No filler: Removes problems rather than hide them
  • Water based
  • Designed for all types of paints
  • High Gloss (91 gloss units)
  • For use with our White foam (AP 005)
  • No splattering
  • Works at low speed (up to 1800 rpm) so less risk of burning the paint
  • No water needed (but can be used with it)
  • To be used on fresh or fully cured paints
  • Free of Silica for better health and safety
  • Can be used with foam and wool pads
  • Doesn’t mark plastics
  • Biodegradable

For a perfect finish and high shine repeat the process with our ZERO SWIRL polish.

To be used on a clean and properly cured surface, avoiding hot surfaces and direct sunlight. Use with our white compounding foam (AP005) on an electric or air-fed polisher at approximately 1800 RPM. Apply a small quantity of HIGH CUT onto the foam pad, place the foam onto the surface to be rectified and start the machine, moving the polisher in a circular motion.
Clean the surface with our soft polishing cloth 40535 once the operation is finished.

Flexipads LP100