LP100

• Easily removes P1500 marks
• Free of silicone, wax or glaze
• No filler: Removes problems rather than hide them
• Water based
• Designed for all types of paints
• High Gloss (91 gloss units)
• For use with our White foam (AP 005)
• No splattering
• Works at low speed (up to 1800 rpm) so less risk of burning the paint
• No water needed (but can be used with it)
• To be used on fresh or fully cured paints
• Free of Silica for better health and safety
• Can be used with foam and wool pads
• Doesn’t mark plastics
• Biodegradable

For a perfect finish and high shine repeat the process with our ZERO SWIRL polish.

To be used on a clean and properly cured surface, avoiding hot surfaces and direct sunlight. Use with our white compounding foam (AP005) on an electric or air-fed polisher at approximately 1800 RPM. Apply a small quantity of HIGH CUT onto the foam pad, place the foam onto the surface to be rectified and start the machine, moving the polisher in a circular motion.
Clean the surface with our soft polishing cloth 40535 once the operation is finished.